42A, Jalan 6/2,
Taman Industri Selesa Jaya,
43300 Seri Kembangan,
Selangor, Malaysia.
2BE1 Series Liquid Ring Vacuum Pump
| Previous | 4 / 4 | Next |
Product info
2BE series liquid ring vacuum pumps are usually used to suction the gas without solid particle, undissolved and noncorrosive gas to generate vacuum and pressure in the closed container. By changing the pump material, they can also be used to suction corrosive gas or use corrosive liquid as operating liquid. They are widely used in paper-making, chemical, petrification, light industry, pharmacy, instruments, metallurgy, construction, electronical appliance, coal-cleaning, mineral concentration, fertilizer, etc.
2BE liquid ring vacuum pump is single stage pump with simple structure. It’s easy maintenance, reliable,efficient and energy-saving operation . They can run under tough working conditions with large drainage discharge and changing load impact. 2BE vacuum pumps adopt unique polytetrafluoroethylene valve plates (former liquid ring pumps use ball valves) for their exhausting systems. Each valve plate is covered on vents in outer side of a port plate and fixed by a stainless steel baffle at its other side. Curvature of the valve plate changes with inlet pressure so that pumping medium can be discharged when it reaches the inlet pressure. Such structure avoids over-compression in a vacuum system and automatically adjusts exhausting area to lower power consumption, thus a best operating efficiency can be obtained.
The key parts of 2BE series liquid ring vacuum pumps, such as distribution plate, impeller and pump shaft are simplified in structure with performance improved, thus it’s very energy-saving.
Dynamic balance problem is radically solved because during impeller welding, blades are formed by one-step stamping with rational molded lines and all wheel hubs are processed. The impeller and pump shaft combined by shrinkage interference fit perform reliably and smoothly. Blades of the impeller will obtain good ductility after the impeller is welded and processed by overall heat treatment, thus impact resistance and flexure resistance of the blades are fundamentally guaranteed the application under tough working condition with changing load impact.
The 2BE pumps are equiped with gas-water separators itself, Many position has the exhausting hole. It is very easy to connect with the vacuum system. What’s more, the pump cover with inspeciton window which can regulate the gland packing of the shaft to adjust the impeller and distributoring plate. All vacuum pumps will be subjected to strict inspections and tests in our testing center so as to guarantee their excellent, reliable and long lasting performances.
Specifications
| Model |
Speed (Driving mode) |
Shaft power |
Motor power |
Ultimate vacuum |
Max. capacity |
Weight (excl. motor) |
|
|
r/min |
KW |
380V |
hpa |
M³/hr |
M³/min |
kg |
|
|
2BE1-102 |
1450 (direct) 1750 (V-belt) |
6.0 8.0 |
Y132M-4-7.5 Y160M-4-11 |
33hpa (-0.097MPa) |
246 290 |
4.1 4.8 |
110 |
|
2BE1-103 |
1450 (direct) 1750 (V-belt) |
8.2 11.1 |
Y160M-4-11 Y160L-4-15 |
33hpa (-0.097MPa) |
340 412 |
5.7 6.9 |
125 |
|
2BE1-152 |
1450 (direct) 1625 (V-belt) 1750 (V-belt) |
12.5 15.0 17.2 |
Y160L-4-15 Y180M-4-18.5 Y180L-4-22 |
33hpa (-0.097MPa) |
450 510 535 |
7.5 8.5 8.9 |
175 |
|
2BE1-153 |
1450 (direct) 1100 (V-belt) 1300 (V-belt) 1620 (V-belt) 1750 (V-belt) |
16.3 10.6 13.4 19.6 22.3 |
Y180M-4-18.5 Y160L-4-15 Y180M-4-18.5 Y180L-4-22 Y200L-4-30 |
33hpa (-0.097MPa) |
600 445 535 648 700 |
10.0 7.4 8.9 10.8 11.7 |
200 |
|
2BE1-202 |
980 (direct) 790 (V-belt) 880 (V-belt) 1100 (V-belt) 1170 (V-belt) 1300 (V-belt) |
18.2 13.4 16.3 23.8 25.7 30 |
Y200L2-6-22 Y180M-4-18.5 Y180M-4-18.5 Y200L-4-30 Y200L-4-30 Y225S-4-37 |
33hpa (-0.097MPa) |
750 590 670 860 888 950 |
12.5 9.8 11.2 14.3 14.8 15.8 |
460 |
|
2BE1-203 |
980 (direct) 790 (V-belt) 880 (V-belt) 1100 (V-belt) 1170 (V-belt) 1300 (V-belt) |
29.5 21.2 24.8 34 38 42 |
Y250M-6-37 Y200L-4-30 Y200L-4-30 Y225M-4-45 Y225M-4-45 Y250M-4-55 |
33hpa (-0.097MPa) |
1080 870 980 1210 1320 1390 |
18 14.5 16.3 20.2 22.0 23.2 |
530 |
|
2BE1-252 |
740 (direct) 565 (V-belt) 660 (V-belt) 830 (V-belt) 885 (V-belt) 938 (V-belt) |
38 23.7 31.8 45 54 60 |
Y280M-8-45 Y200L-4-30 Y225S-4-37 Y250M-4-55 Y280S-4-75 Y280S-4-75 |
33hpa (-0.097MPa) |
1700 1200 1500 1770 2000 2100 |
28.3 20.0 25.0 29.5 33.3 35.0 |
870 |
|
2BE1-253 |
740 (direct) 565 (V-belt) 660 (V-belt) 740 (V-belt) 792 (V-belt) 820 (V-belt) 880 (V-belt) 940 (V-belt) |
54 37.2 45 50.8 60 68 75.1 88 |
Y315M-8-75 Y225M-4-45 Y250M-4-55 Y280S-4-75 Y280S-4-75 Y280M-4-75 Y280M-4-90 Y315S-4-110 |
33hpa (-0.097MPa) |
2450 1690 2100 2340 2560 2640 2780 3050 |
40.8 28.2 35 39 42.7 44 46.3 50.8 |
930 |
|
2BE1-303 |
740 (direct) 590 (direct) 466 (V-belt) 530 (V-belt) 583 (V-belt) 660 (V-belt) 740 (V-belt) |
98 65.5 48 58 64 79.8 96 |
Y315L2-8-110 Y315L2-10-75 Y250M-4-55 Y280S-4-75 Y280S-4-75 Y280M-4-90 Y315S-4-110 |
33hpa (-0.097MPa) |
4000 3200 2520 2820 3100 3550 3840 |
66.7 53.3 42 47 51.7 59.2 64 |
1700 |
|
2BE1-305 |
740 (direct) 590 (direct) 490 (V-belt) 530 (V-belt) 583 (V-belt) 660 (V-belt) 740 (V-belt) |
108 70 55 61 68 90 110 |
Y355M1-8-132 Y355M1-10-90 Y280S-4-75 Y280S-4-75 Y280M-4-90 Y315S-4-110 Y315M-4-132 |
33hpa (-0.097MPa) |
4520 3750 3150 3380 3700 4090 4550 |
75.3 62.5 52.5 56.4 61.2 68.1 75.8 |
1820 |
|
2BE1-353 |
590 (direct) 390 (V-belt) 425 (V-belt) 464 (V-belt) 530 (V-belt) 560 (V-belt) 620 (V-belt) 660 (V-belt) |
121 63 72 85 95 110 133 152 |
Y355L2-10-160 Y280S-4-75 Y280M-4-90 Y315S-4-110 Y315M-4-110 Y315L1-4-132 Y315L1-4-160 Y315L2-4-185 |
33hpa (-0.097MPa) |
5300 3580 3700 4100 4620 5000 5500 5850 |
88.3 59.7 61.7 68.3 77.0 83.3 91.7 97.5 |
2300 |
|
2BE1-355 |
590 (direct) 390 (V-belt) 420 (V-belt) 464 (V-belt) 523 (V-belt) 590 (V-belt) 660 (V-belt) |
136 75 80.8 95 113 136 182 |
Y355L2-10-160 Y280M-4-90 Y280-4-90 Y315S-4-110 Y315M-4-132 Y315L1-4-160 Y315L2-4-200 |
33hpa (-0.097MPa) |
5700 4180 4260 4850 5230 6000 6510 |
95 69.7 71 80.8 87.1 100 108 |
2450 |
|
2BE1-403 |
330 (V-belt) 372 (V-belt) 420 (V-belt) 472 (V-belt) 530 (V-belt) |
98 110 131 160 213 |
Y315M-4-132 Y315M-4-132 Y315L1-4-160 Y315L2-4-200 Y355M2-4-250 |
33hpa (-0.097MPa) |
4860 5400 6470 7380 8100 |
81 90 107.8 123.0 135.0 |
3750 |
|
2BE1-405 |
330 (V-belt) 372 (V-belt) 420 (V-belt) 472 (V-belt) 530 (V-belt) |
100 118 140 170 216 |
Y315M-4-132 Y315L1-4-160 Y315L2-4-185 Y315L2-4-200 Y355M2-4-250 |
33hpa (-0.097MPa) |
6000 6700 7500 8350 9450 |
100.0 111.7 125.0 139.2 157.5 |
3900 |